The Efficient Home Forum

The controller drops into Economy Mode for some rooms without Economy Mode being selected.

The rooms drop temperature by 3o but to reset the only way seems to be to turn the heating off and back on again. However although this resets the various affected rooms after a few seconds the Economy Mode comes back on for those rooms.

Has anyone experienced this and if so did they find a fix.

'Economy' mode or 'Optimum Stop'? Have you got Optimum Stop enabled? The symbol is very similar.

You cant enable Eco mode separately for individual zones - it's all or nothing.

So it's probably Optimal Stop turning down those zones early - it will turn them down to the following set point if it believes it can do so now without the temperature dropping more than 0.5 degrees below the current set point before the current set point is due to end.

Personally I don't use Optimal Stop, so if you don't like that behaviour you can turn it off.