Y87RF has no way to check the RF signal
Posted: Thu Oct 20, 2016 7:47 pm
All the other devices I have can signal the RF strength at their location. The Y87RF seems to have no menu option for this.
I am using one in a full Evohome system as a zone temperature sensor/controller and it works OK as a test setup with a rad valve but I want to locate the best position for both temperature control and signal level in a difficult room.
I am using one in a full Evohome system as a zone temperature sensor/controller and it works OK as a test setup with a rad valve but I want to locate the best position for both temperature control and signal level in a difficult room.