Opentherm oil boilers

Anything to do with OpenTherm and Honeywell Home products in here! *PLEASE NOTE* Official Resideo technical support is on 0300 130 1299.
Post Reply
alanatabz
Posts: 1
Joined: Fri Apr 13, 2018 9:18 am

Opentherm oil boilers

Post by alanatabz »

I Have a Camray 5 oil bolier for hot water and heating.

I have an EVOHOME system I just installed and now looking at what i can do with the boiler.

Our Central heating has no thermostat, its basically controlled by the temperature of the water at the boler or when using hot water side when thermostat on tanks reaches the set point.

The boiler is controlled by a LP722 controller on a times basis


To utilise my Evohome system better (and as an excuse to get rif od a 15 year old oil boiler) looking for suitable replacements for the Camray 5 that is compatiable with Evohoem controller


Also, my water tank is an osowater one which has a case round it, anybody put the water thermostat / sensor on and connected bcak to the Evohome controller?


and finally

Our Bathroom has underfloor heating, it's electric controlled by a small box the size of a light switch. Can this be controlled by Evohome controller? it appears the controllers there are for controllingw ater valves to heat the floor and not an electric heating element.
User avatar
Richard
Site Admin
Posts: 1199
Joined: Fri Jun 10, 2016 4:08 pm
Location: Mid Wales
Contact:

Re: Opentherm oil boilers

Post by Richard »

No such thing as an OpenTherm oil boiler (yet)... evohome will work with oil boilers using TPI control via a BDR91 just fine!

If it was me I would convert to LPG and have an Intergas OpenTherm boiler fitted... 8-)
Home: 2012 Built Oak & Timber Frame Home (EPC Score 95 - A Rated)
Renewable Tech: GSHP, Solar Thermal, Solar PV & 20kWh Battery Storage
Smart Home Platform: Home Assistant, Shelly & Salus Smart Home
Post Reply